Most Modernized Equipment for Lifting The House

House lifting has conveniently improved with the entrance of modernized equipment for assistance and higher performance. Some of them are as follows:

The unified jacking system:

The unified jacking system allows for multiple hydraulic jacks to be controlled and synchronized from a central point in order to maintain the safest lift conditions and stay within the tightest tolerances of balance on heavy lift projects.

Unified jacking machines blend the multiple jacks and make them function at the exact same rate and supplies the oil evenly regardless of the amount of load its bearing. It’s capacity can increase drastically by connecting more than one jack to each of the unified outlet. The connection of two jacks will only extend half stroke before the main unit runs out of stroke, then the locks must be set , reset the main unit and continue with the second half of the lift. Most of the unified machines contain extra oil to support the movement of the additional jacks per outlet.The best way to explain how "helper" jack outlets work is to think of a long, narrow house with a heavy fireplace at one end. If you are using 6 jacks you would put a pair of jacks at each end of the building and two in the middle. You find out that the heavy end cannot be raised even with those two jacks at full pressure. You can place two jacks each connected to one "helper" outlet next to each of the two unified jacks under the heavy end of the building. If the jacks at the light end are both at 2000 PSI, and the two in the middle are at 3500 PSI, and the two overloaded jacks were at 6000 PSI, the average and the pressure on the helper outlets will be approximately 4000 PSI. The helper jacks will assist the overloaded unified jacks to lift the load, without traveling faster than the unified jacks and lifting the load off of the unified jacks. If you were to put the "helper" jacks under the light end they would pick up the load faster than the unified jacks and they would run away with the load.

Buckingham Power and Coaster Dollies:

Buckingham Power and Coaster Dollies feature a heavy-duty frame, a gooseneck front end and a heavy-duty three-position tongue designed for external towing when necessary. Rated at 45 Ton (4600 PSI) with a 5" bore, 16" lifting cylinder with the option of a 7" bore, 16" lifting cylinder. Our Power Dollies feature Poclain drive hubs; posit action, caster steering and optional hydraulic steering for the most advanced dollies on the structural moving market. Whether Power or Coaster, our dollies are designed for hard work and stress-free moving with well-marked handles and gauges for ease of use and handling. They are upgradable with Hydraulic Power Steering, heavy-duty pull tongue.

These machinery works robotically to get job done with their extensive feature and work capacity, work of hours is speeded up and done efficiently.